Network
Setting | Description |
IP_Conf0 |
With this setting you can either let the card obtain an IP address automatically via DHCP, or assign an IP address manually. By default this is set to DHCP. |
mGW0 | With IP_Conf0 set to manual, this setting lets you set a Standard Gateway. Default is set to 0.0.0.0. |
mIP0 |
When IP_Conf0 is set to manual, you can enter the preferred IP address here. By default it is set to 0.0.0.0 |
NetwPrefix0 |
Here you can set the specific network prefix if required. |
mNM0 | With IP_Conf0 set to manual, with this setting you can set a Netmask. Default is 0.0.0.0 |